BuyLog Flippingbook MAY 2025

13-61

BUSWAY, BUYLOG SECTION 13

— ReliaGear ™ series busway LowAmp Outlines and dimensions

End cable tap boxes - lugs per phase Amperage

No. of #2-600kcmil Lugs/Ø N & GRD

225 Amps 400 Amps 600 Amps 800 Amps

1 2 2

3 End Boxes are required to terminate busway runs. No joint assembly is required, and the end surface of the box is even with the joint centerline. See table on page 13-51 for “A” dimension. Box is secured via joint cap bolts.

Center cable tap boxes - lugs per phase Amperage

End cable tap box: feeder or plug-in

No. of #2-600kcmil Lugs/Ø N & GRD

225 Amps 400 Amps 600 Amps 800 Amps

1 2 2 3

Floor/wall flange cutout and drilling detail Bar Width (mm) Dimension X (mm)

Dimension Y (mm)

.750

5.000 5.375 6.000 7.125

8.500 8.875 9.500 10.625

1.125 1.750 2.875

Standard end cable tap box down position, side view

Note: Floor or wall opening should provide 1/2" clearance all around the Busway.

Standard center cable tap box down position, side view

End box

Inverted end tap box up position, side view

Wall/floor flange

Center cable tap box: feeder or plug-in

Inverted center cable tap box up position, side view