BuyLog Flippingbook FEB 2025

9-189

DISCONNECT SWITCHES AND OPERATING MECHANISMS, BUYLOG SECTION 9

— HPC™, new generation high-pressure contact switch Accessories - HPC™ switch, new generation All devices UL listed for factory or field installation except where noted.

Shunt Trip The shunt trip accessory is an electronic module, which provides remote control capability to open the switch. When activated, the shunt trip module sends a signal to the control unit to open the switch. This allows the control unit to record, display, distinguish and communicate that the opening event was initiated by the shunt trip device. The shunt trip is continuously rated and requires no cut-off switch. When energized, the shunt trip supplies +24Vdc power to the control unit to power the display.

Field Installable Product Number

Factory Installed Product Number

Ratings Vac

Ratings Vdc

-

12 24 48

SPST012R SPST024R SPST048R SPST120R SPST208R SPST240R SPST480R 1 SPST600R 1

SPST012 SPST024 SPST048 SPST120 SPST208 SPST240 SPST480 1 SPST600 1

24 48

120 208 240 480 600

125

-

Shunt Trip Module

250

- -

1 Kit contains externally mounted transformer.

Shunt Trip with Lockout Module The shunt trip with lockout is identical to the regular shunt trip, but when energized, it will also prevent closure of an "open" switch by mechanically blocking both manual and electrical closing. When energized, the closing springs will not discharge, the movable contacts will not move; the contacts are "kiss free."

Field Installable Product Number

Factory Installed Product Number

Ratings Vac

Ratings Vdc

-

12 24 48

SPSTL012R SPSTL024R SPSTL048R SPSTL120R SPSTL208R SPSTL240R SPSTL480R 1 SPSTL600R 1

SPSTL012 SPSTL024 SPSTL048 SPSTL120 SPSTL208 SPSTL240 SPSTL480 1 SPSTL600 1

24 48

120 208 240 480 600

125

-

250

- -

1 Kit contains externally mounted transformer.

Undervoltage Release Module The undervoltage release is an electronic module used to open the switch when the monitored voltage drops below 35-60% of its rated value. The undervoltage release "resets" when the monitored voltage is re-established allowing the switch to re-close (the sealing voltage of the UVR is 60-85% of its rated voltage). An undervoltage release trip operation is produced by the GTU control unit in response to a signal from the undervoltage release module. This allows the control unit to record, display, distinguish and communicate that the switch opening event was due to undervoltage release. Operation of the undervoltage release module will prevent switch contact closure, i.e. "kiss-free" operation. When energized, the undervoltage release supplies +24 Vdc power to the control unit to power the display.

Field Installable Product Number SPUV024ACR SPUV048ACR SPUV120ACR SPUV208ACR SPUV240ACR SPUV480ACR 1 SPUV600ACR 1 SPUV012DCR SPUV024DCR SPUV048DCR SPUV125DCR SPUV250DCR

Factory Installed Product Number

Ratings Vac

Ratings Vdc

Undervoltage Release Module

24 48

- - - - - - -

SPUV024AC SPUV048AC SPUV120AC SPUV208AC SPUV240AC SPUV480AC 1 SPUV600AC 1 SPUV012DC SPUV024DC SPUV048DC SPUV125DC SPUV250DC

120 208 240 480 600

- - - - -

12 24 48

125 250

1 Kit contains externally mounted transformer.