BuyLog Flippingbook FEB 2025

8-103

LOW VOLTAGE POWER & INSULATED CASE CIRCUIT BREAKERS, BUYLOG SECTION 8

— EntelliGuard ™ G low voltage power circuit breakers EntelliGuard ™ G accessories

Mechanical Interlocks (Cable/Rod) (OEM Applications Only) Available for fixed and draw-out circuit breakers, these units enable the direct interlocking of EntelliGuard G circuit breakers, either mounted side-by-side or stacked. The interlocking mechanisms are connected by a specially designed cable or rod in a 1 from 2, 1 from 3, and 2 from 3 configuration, and any mix of current ratings/pole configurations can be accommodated.

Number of Cables Required

Product Number GI2WADR GI3WADR GI2FADR GI3FADR GI2WBR GI3WBR GI2FBR GI3FBR GI2WCR GI3WCR GI2FCR GI3FCR GI2WDTR GI3WDTR GI2FDTR

Interlock Type

Breaker Type

Poles

Withdrawable Withdrawable

3 4 3 4 3 4 3 4 3 4 3 4 3 4 3

2 Way - Type A

2

Fixed Fixed

Withdrawable Withdrawable

1 from 2 - Type B 6

Fixed Fixed

Withdrawable Withdrawable

2 from 3 - Type C 6

Fixed Fixed

Withdrawable Withdrawable

1 from 3 - Type D 4

Fixed

Refer to Section 4 of the Application Guide DET-653B for interlocking schemes.

Mechanical Interlock Cables Standard cable lengths are shown. (Cables ordered separately. Please contact our technical customer service department if longer length is required.)

Length (M/In)

Product Number

1 / 39.4 1.6 / 63 2 / 78.7

GCB1 GCB2 GCB3 GCB4 GCB5 GCB6 GCB7

2.5 / 98.4 3 / 118/1 3.5 / 137.8

4 / 157.5

Bell Alarm with Lockout The Bell Alarm provides remote indication that the circuit breaker has opened because of an electrical fault. The Lockout feature is integral to the trip unit. When a Bell Alarm is supplied with the breaker, the Trip Unit dial is set and locked to the manual position. In order to re-close the breaker, the Lockout button must be pushed in/reset on the Trip Unit 1-Form C contact.

Bell Alarm with Lockout

Switch Configuration

Product Number

Single pole, double throw (1-Form C contact)

GBAT1R