BuyLog Flippingbook NOV 2024

LOW VOLTAGE POWER & INSULATED CASE CIRCUIT BREAKERS, BUYLOG SECTION 8

8-100

— EntelliGuard ™ G low voltage power circuit breakers EntelliGuard ™ G accessories

Status Indication Switch (Coil Signaling Contact) A plug-in module is available to provide status indication via the secondary disconnects and trip unit. Coil Signaling Contacts are available for closing coils, shunt trips and under voltage releases. Contact is mounted on top of the Accessory Device. One of the low signal (Hi-Fi) contacts is always wired to the trip unit.

Status Indication Switch

Type and Configuration

Rating

Voltage 120Vac 250Vac 120Vac 250Vac 125Vac

Amps

Product Number

AC AC DC DC AC DC

6 6

1 Power rated + 1 Low signal (Hi-Fi) (1NO contact each)

0.5

GCSP1R

0.25

0.1 0.1

30Vdc

2 Low signal (Hi-Fi) (1NO contact each)

AC

125Vac

0.1

GCSP2R

Status Indication Switch

Under Voltage Release (UVR) with Fixed Time Delay The UVR instantaneously activates the circuit breaker trip mechanism when the source voltage drops below the low voltage threshold. The UVR is also a simple, field installable device.

Power Consumption

Nominal Control Voltage

Product Number

24Vdc 30Vdc

GUVT024DR GUVT030DR GUVT048R GUVT060DR GUVT120R GUVT208AR GUVT240R GUVT277R

DC: 350W, 2W (sealed)

40Vdc; 48Vac/dc

60 - 72Vdc

AC: 350W (inrush), 20W (sealed)

110Vdc/130Vdc; 120Vac

208Vac

220Vdc; 240Vac 250Vdc; 277Vac

Under Voltage Release

Duty Cycle = 2/min. Inrush = 350VA (AC), 350W (DC) Holding = 60VA (AC), 50W (DC)