BuyLog Flippingbook FEB 2025

PANELBOARDS, BUYLOG SECTION 11

11-78

— ReliaGear neXT product number nomenclature

RELT

RT 04 A

Part identifier RT = RELT

Voltage A = 120/240 V, 208/120 V and 240 V Delta

B = 480 V, 480 V Delta and 480/277 C = 600 V, 600 V Delta and 600/347

Enclosure width 04 = 40"–45"

Notes: RELT is available for the 40"W and 45"W enclosures only. When RELT is ordered separately: • F or XT7, Ekip supply and Ekip signalling 2k are also needed — see wire connector kits for RELT module. • RELT comes with filler plate. When RELT is ordered with configured panel: • F or XT7, Ekip supply and Ekip signaling 2k are also supplied in a CN series wire connector kit.

Wire connector kit for RELT module

CN 001

For use with 001 = XT7 connector extension kit

Part identifier

CN = Wire connector kit

003 = XT7 2k-1 kit 004 = XT7 2k-3 kit

Notes: For replacement wire connector kits, an exact replacement must be used (i.e., a 2K-1 kit must be used to replace an existing 2K-1 kit). Failure to do so may result in incorrect RELT functionality or require the breaker to be re-programmed. Refer to 9AKK107991A2520 and 1SQC900005M0201 for more information.

CN003 includes Ekip 2K-1 signaling and Ekip supply.

CN004 includes Ekip 2K-3 signaling and Ekip supply. CN004 is ONLY compatible with firmware version 3.10.00 or higher. Refer to 9AKK107991A2520 to validate firmware version.

CN001 is a cable extension for use with XT7 vertical mains. When vertical main is used, you must order CN001 and CN003 or CN001 and CN004.